Chevrolet's 350 H.O. Deluxe Crate Engine

If you are looking for a Chevy engine that is ready to run right out of the crate,for your muscle car,then this crate motor is for you.Featuring a Holley 600CFM vacumm secondary bolted to a dual plane aluminum intake manifold,an internal coil H.E.I.balancer,water pump and flywheel.You basically bolt on the accessories and fire it up!

From GM Performance -
Horse power: 330 @ 5000 RPM.
Torque 380 Ft. Lbs @ 3800.
Max. Recommended RPM 5500.
Compression Ratio 9:1.1.
Block 10105123 Cast iron four bolt with one piece rear main steel.
Crankshaft 14088527 nodular cast iron.
Connecting rods 10108688 PM steel.
Pistons 12361371 cast aluminum.
Camshaft 24502476 lift: .435 inch I, .460 inch E, duration @ .050: 212 I, 222 E.
Timing chain 14087014,
Cylinder heads 12558060 cast iron 64cc Vortec combustion chambers.
Intake valves 10241743 1.94 inch. Exhaust valves 12550901 1.50 inch.
Valve springs 10212811.
Rocker arms 10089648 1.5 ratio.
Valve lash zero.
Spark plugs R44TS gap @ .045 (300 HP 350), 41-932 Gap @ .060 (330 HP 350), R44LTS gap @ .045 (330 HP 350), Rapid fire #8 @ .035.
Ignition Timing 10 BTDC @ 700 RPM."

The cost of this engine is normally $4,495.00,
it is on sale right now for ...................$4,099.00
truck freight continental U.S.................$140.00
Total..........................................................$4239.00